|
2nd factory
|
|
|
@1st Floor |
On this floor we install Machining Centers to process hydraulic equipment parts mainly. A wide variety of horizontal and vertival types, with a maximum processable size of 1,000mm (X) by 600mm (Y) by 650mm (Z), can machine flexibly either a single piece or mass-produced parts.
|
@ |
|
|
|
@2nd Floor |
On this floor we install Sliding headstock type auto NC Lathes with a bar feeder and NC Lathes with a three-jaw chuck spindle for precise finishing. Any size including 1mm diameter or less items can be turned.
|
@ |
|
|
|
@3rd Floor |
This is the place for assembling hydraulic and/or aircraft parts. Our techniques for assembling O-ring set-in, Pin press-fit, soldering, helical tap insert, potting and specialized jigs etc. enable to fabricate various complicated items.
|
@ |
|
|
|
@Inspection room |
This is the place where we measure finished goods by 3D measuring machines and/or roundness measuring instruments to assure high quality.
|
No. | Maker | Description | Model | Factory/Floor | Installed |
1 | Miyano | Bar work(CNC highspeed 2 Spindle Lathe) | BNC-50 | 2nd
/2F | 8/1983 |
2 | Miyano | Bar work(CNC highspeed 2 Spindle Lathe) | BNC-20 | 2nd/2F | 3/1983 |
3 | Miyano | Bar work(CNC 2 Spindle Lathe) | LE-01 | 4th | 10/1988 |
4 | Miyano | Bar work(NC Lathe 2 Spindle + 1 Turret) | BNC-34 | 2nd/2F | 3/1992 |
5 | Miyano | Bar work(NC Lathe 2 Spindle + 1 Turret Composed) | BND-34S | 2nd/2F | 3/1992 |
6 | Miyano | Bar work(NC Lathe 2 Spindle + 1 Turret Composed) | BND-34S5 | 2nd/2F | 6/1997 |
7 | Miyano | Bar work(NC Lathe 2 Spindle + 2 Turret) | BND-34S5 | 2nd/2F | 6/2000 |
8 | Miyano | Bar work(NC Lathe 2 Spindle + 2 Turret Composed) | BNJ-34S | 3rd/1F | 7/2003 |
9 | Miyano | Bar work(NC Lathe 2 Spindle + 2 Turret Composed) | BNJ-34S | 3rd/1F | 9/2003 |
10 | Miyano | Bar work(NC Lathe 2 Spindle + 2 Turret Composed) | BNJ-34S | 3rd/1F | 9/2003 |
11 | Miyano | | Bar work(NC Lathe 2 Spindle + 2 Turret Composed)BNJ-34S | 3rd/1F | 10/2003 |
12 | Miyano | Bar work(NC Lathe 2 Spindle + 2 Turret Composed) | BNJ-34S | 3rd/1F | 10/2003 |
13 | Miyano | Bar work(NC Lathe 2 Spindle + 2 Turret) | BNJ-34S | 3rd/1F | 6/2006 |
14 | Miyano | Bar work(NC Lathe 2 Spindle + 2 Turret Composed) | BNA-34DHY | 2nd/2F | 3/2012 |
15 | Muratec | CNC highspeed 2 Spindle Lathe (with Autoloader) | MR-6 | 2nd/2F | 6/1991 |
16 | Muratec | Gantry type Twin Spindle CNC Chucker | MW-12 | 4th | 12/1993 |
17 | Muratec | Gantry type Twin Spindle CNC Chucker | MW-120 | 1st | 1/2001 |
18 | Muratec | Gantry type In-line opposed Twin Spindle CNC Chucker | MT-12 | 3rd/1F | 5/2004 |
19 | Muratec | Gantry type Twin Spindle CNC Chucker | MW-120 | 3rd/1F | 12/2004 |
20 | Muratec | Gantry type Twin Spindle CNC Chucker | MW-120 | 3rd/1F | 4/2005 |
21 | Muratec | Gantry type Twin Spindle CNC Chucker | MW-120 | 3rd/1F | 3/2010 |
22 | Muratec | Gantry type Twin Spindle CNC Chucker | MW-120 | 3rd/1F | 6/2010 |
23 | Muratec | Gantry type CNC Turning Center | MD-200 | 6th | 12/2010 |
24 | Muratec | Gantry type In-line opposed Twin Spindle Turning Machine | MT-20 | 7th | 7/2011 |
25 | Muratec | Gantry type In-line opposed Twin Spindle Turning Machine | MT-20 | 7th | 8/2011 |
26 | Muratec | Gantry type In-line opposed Twin Spindle Turning Machine | MT-20 | 7th | 1/2012 |
27 | Muratec | Gantry type In-line opposed Twin Spindle Turning Machine | MT-20 | 7th | 1/2012 |
28 | Muratec | Gantry type In-line opposed Twin Spindle Turning Machine | MT-20 | 7th | 3/2012 |
29 | Muratec | Gantry type In-line opposed Twin Spindle Turning Machine | MT-20 | 7th | 3/2012 |
30 | Hitachi Seiki | NC Lathe (with Autoloader) | NR-20 | 4th | 6/1985 |
31 | Hitachi Seiki | NC Lathe | NR-20 | 4th | 4/1990 |
32 | MAZAK | Multi-tasking machine | INTEGREX 200SY | 6th | 8/2001 |
33 | MAZAK | 2 Spindle CNC Turning Center | MULTIPLEX 6200Y | 3rd/1F | 11/2006 |
34 | TAKAMAZ | CNC Precision Lathe | EX-10 | 2nd/2F | 3/1990 |
35 | OKUMA | 2 Saddle CNC Lathe | LU15MW | 3rd/1F | 8/1998 |
36 | TECNO WASINO | Gang type CNC Lathe | SG-5 | 2nd/2F | 8/1997 |
37 | TECNO WASINO | Gang type CNC Lathe (2 Spindle) | GG-5 | 3rd/1F | 6/2004 |
38 | TECNO WASINO | Gang type CNC Lathe (2 Spindle) | GG-5 | 3rd/1F | 9/2004 |
39 | TECNO WASINO | Gang type CNC Lathe (2 Spindle) | GG-5 | 3rd/1F | 7/2005 |
40 | TECNO WASINO | Gang type CNC Lathe (2 Spindle) | GG-5 | 3rd/1F | 11/2005 |
41 | CITIZEN MACHINERY | CNC Lathe Sliding Headstock type | Sincom L-20 | 2nd/2F | 7/2003 |
42 | STAR MICRONICS | CNC Auto Lathe (2 Spindle, Gang type, Composed) | SB-16 | 2nd/2F | 6/2004 |
43 | STAR MICRONICS | CNC Auto Lathe (2 Spindle, Gang type, Composed) | SB-16 | 2nd/2F | 8/2004 |
44 | STAR MICRONICS | CNC Auto Lathe (2 Spindle, Gang type, Composed) | SB-16 | 2nd/2F | 8/2004 |
45 | TAKISAWA | General purpose CNC Lathe (6 inch chuck with loader) | TC-100 | 4th | 6/2006 |
46 | TAKISAWA | General purpose CNC Lathe (8 inch chuck) | TC-203J | 4th | 3/2012 |
No. | Maker | Description | Model | Factory/Floor | Installed |
47 | OKUMA | Drilling machine | DCC-25 | 1st | 2/1998 |
48 | OKUMA | Horizontal Machining Center | VH40 | 2nd/1F | 11/1996 |
49 | OKUMA | Horizontal Machining Center | VH40 | 2nd/1F | 11/1999 |
50 | OKUMA | Horizontal Machining Center | VH40 | 2nd/1F | 7/2000 |
51 | OKUMA | Horizontal Machining Center | MILLAC 44H | 1st | 5/2011 |
52 | OKUMA | Horizontal Machining Center | MILLAC 44H | 1st | 5/2011 |
53 | KITAMURA | Horizontal Machining Center | HX400iSU | 1st | 11/2010 |
54 | KITAMURA | Horizontal Machining Center | HX400iSU | 1st | 1/2011 |
55 | KIRA | Machining Center (Taper) | PC30E | 1st | 8/2004 |
56 | TECNO WASINO | NC Milling machine | CM-3ST | 1st | 6/1989 |
57 | FANUC | CNC Tapping Center | Ώ-T10C | 2nd/1F | 7/2005 |
58 | BROTHER | CNC Tapping Center | TC-225 | 4th | 7/2012 |
59 | BROTHER | CNC Tapping Center | TC-20A | 1st | 9/2012 |
60 | BROTHER | CNC Tapping Center | TG-31A | 1st | 4/2013 |
61 | BROTHER | CNC Tapping Center | TG-31A | 1st | 4/2013 |
62 | Miyano | Tapping machine | TSV-35 | 2nd/2F | 4/1992 |
63 | MITSUI SEIKI | Horizontal Machining Center | HU50A | 2nd/1F | 4/1997 |
64 | MITSUI SEIKI | Vertical Machining Center | VU65A | 2nd/1F | 3/1998 |
65 | MORI SEIKI | Horizontal Machining Centre | NH4000 | 1st | 3/2006 |
66 | MORI SEIKI | Horizontal Machining Centre | NH4000 | 1st | 9/2006 |
67 | MORI SEIKI | Horizontal Machining Centre | NH4000 | 1st | 10/2006 |
68 | MORI SEIKI | Horizontal Machining Centre | NH4000 | 1st | 4/2010 |
69 | MORI SEIKI | Horizontal Machining Centre | NH4000DCG | 1st | 3/2012 |
70 | MORI SEIKI | Vertical Machining Centre | NV4000 | 1st | 9/2004 |
71 | MORI SEIKI | Vertical Machining Centre | NV4000 | 1st | 3/2005 |
72 | MORI SEIKI | Vertical Machining Centre | NV4000 | 1st | 3/2005 |
73 | MORI SEIKI | Vertical Machining Centre | NV4000 | 1st | 3/2005 |
74 | MORI SEIKI | Vertical Machining Centre | NV4000 | 1st | 2/2008 |
75 | MORI SEIKI | Vertical Machining Centre | NV4000 | 1st | 6/2010 |
76 | MORI SEIKI | Vertical Machining Centre | NV5000 | 2nd/1F | 5/2004 |
77 | MORI SEIKI | Vertical Machining Centre | NV5000 | 2nd/1F | 3/2005 |
78 | MORI SEIKI | Vertical Machining Centre | NV5000 | 2nd/1F | 6/2005 |
79 | MORI SEIKI | Vertical Machining Centre | NV5000 | 2nd/1F | 11/2007 |
80 | MORI SEIKI | Vertical Machining Centre | NVX5080 | 2nd/1F | 5/2012 |
81 | MORI SEIKI | Horizontal Machining Centre | SH-junior | 2nd/1F | 7/2001 |
82 | MAKINO | Horizontal Machining Center | -51 | 5th | 7/2006 |
83 | MAKINO | Horizontal Machining Center | -55 | 5th | 11/2006 |
84 | MAZAK | Multi-tasking machine (5 axis) | VARIAXIS 730-5XU | 2nd/1F | 12/2010 |
85 | ROKU-ROKU | Horizontal Machining Center (for small item) | Libero Rx6 | 1st | 7/2003 |
86 | ROKU-ROKU | Horizontal Machining Center (for small item) | Libero Rx6 | 1st | 11/2003 |
87 | ROKU-ROKU | Horizontal Machining Center (for small item) | Libero Rx6 | 2nd/1F | 5/2004 |
88 | ROKU-ROKU | Horizontal Machining Center (for small item) | Libero Rx6 | 2nd/1F | 5/2004 |